Kit Home Index › Concrete panel

PANELCONSA S.A. Emmedue M2 - PSME (single structural), PSTE (partition), PDME (double), PSSGE (slab with beams); panel PSME80

Name: PANELCONSA S.A. Emmedue M2 - PSME (single structural), PSTE (partition), PDME (double), PSSGE (slab with beams); panel PSME80
Brand: PANELCONSA S.A.

Concrete panelUnclear if you can order itPANELCONSA S.A. ↗

The Emmedue M2 - PSME (single structural), PSTE (partition), PDME (double), PSSGE (slab with beams); panel PSME80, a concrete panel kit from PANELCONSA S.A., has no published price.

PANELCONSA S.A. does not publish a wind rating, a snow load or a price for this model, so 75 percent of the fields we score are blank.

None of that tells you whether it works on your land. Wind, snow, seismic and flood performance are site specific engineering, so the only useful answer comes from running this kit against your address.

Completeness

25%

25 percent of the fields we score are backed by something PANELCONSA S.A. published. Why completeness is never part of the grade.

The thing nobody else will tell you

This kit cannot be scored on its own. Nothing on this page tells you whether it works on your land.

Wind, snow, seismic and flood performance come from your address, not from this kit. Put in an address and the gates run against the real requirement at that point.

Score this kit against my land

Free, and it stays free.

The Kit Home Finder Grade

Not ratedNot rated, which is the absence of a score rather than a bad one. We could not rate buyability or cost honesty, and a grade needs two of the three, so the materials and carbon tier score we do have stands on its own below. This says nothing about how the kit performs. A maker can publish an excellent wind and snow rating and still be unrateable here, because this grade measures whether you can buy it, whether the price is honest, and what it is made of.

Rubric v1.0, August 2026. Site fit is not in this grade, because it depends on your land rather than on the kit. Every weight, and what we refuse to grade.

What the maker publishes

Everything here came off PANELCONSA S.A.'s own pages, cited at the bottom. A blank is a blank: we never fill one in.

Build type	Concrete panel
Structural system	Licensed Emmedue M2 factory: polystyrene core with galvanised steel mesh, erected and then shotcreted, forming load-bearing walls ('sistema de paredes portantes'). Product lines: structural line and architectural line.
Finished size	Not published
Bedrooms	Not published
Bathrooms	Not published
Wall R value	Not published
Roof R value	Not published
Foundation types	Not published
Lead time	Not published
Delivers to	Nicaragua (plant at Km 30 Masaya-Granada highway, Complejo Industrial INCA, Masaya) and Honduras
Country	Nicaragua
Build difficulty	Specialist crew and equipment Concrete is placed on site, which needs a pump, a crew and a finisher. This is not an owner build in any ordinary sense. Read from the construction method.

What the maker says it resists

Design capability as published. Not a certification, not a rating of your house, and not proof against anything.

Engineered wind speed	Not published
Roof snow capability	Not published
Seismic	Verbatim: 'El sistema Emmedue M2 es un sistema de paredes portantes y como tal, si hay una distribucion uniforme de las paredes en la planta y una cierta regularidad de elevacion, tiene un comportamiento ideal en caso de sismo.' No test result, zone or standard is cited alongside it. The site lists certification marks from TUV SUD, ENEA, EUCENTRE, Indian Green Building Council and the Nicaraguan Ministry of Transport and Infrastructure (MTI), but publishes no report numbers. A dedicated 'Resistencia a los Sismos' page exists but served only image content and could not be read.
Fire	Verbatim: 'Las pruebas de resistencia al fuego efectuadas sobre los paneles PSME80 han demostrado una resistencia al fuego mayor de REI 120.' i.e. greater than 120 minutes REI. Polystyrene described as 'auto extinguible'.

Price

Not published

This maker publishes no price. That is the single most common gap in the Index, and it is the first thing to ask them.

What that number covers	Not published

What else we found

Emmedue (M2) licensee of Italy - one of the largest in Central America; the same company runs a Honduras operation (panelconsa.com/panelconsa-en-honduras/, which returned a 404 page when fetched). Thermal claim published only as a ratio: polystyrene insulates '4 a 5 veces superior' to traditional systems - no U or R value. Wind and ballistic claims ('fuertes vientos', bullet impacts) are qualitative marketing, not specifications. EUCENTRE is the European Centre for Training and Research in Earthquake Engineering, which is why its logo matters here, but no report is published.

Questions to send this maker

Generated from what they left blank. Every one of these is a thing they could answer today and have chosen not to publish. Copy them into an email. If they answer, tell us and we will update this page with the citation.

Can I place an order for this model today, and what is the deposit?
What does this cost, in dollars, and exactly which build stages does that number cover?
What design wind speed is this model engineered to, in miles per hour, and at what Risk Category and Exposure Category?
What ground snow load can the roof carry, in pounds per square foot, and is that the ground load or the roof load?
Which foundation types does this kit support, and can it sit on piers above a base flood elevation?
What is the wall R value, and is that nominal insulation or a tested whole assembly value including thermal bridging?
What is the roof R value, and is it nominal or whole assembly?
What is the finished square footage of this model?
What is the lead time in weeks from deposit to delivery, right now?

Across the whole Index, the average kit publishes about a quarter of what a buyer needs. This maker is at 25 percent.

Questions people ask about the PANELCONSA S.A. Emmedue M2 - PSME (single structural), PSTE (partition), PDME (double), PSSGE (slab with beams); panel PSME80

Answered from what PANELCONSA S.A. publishes, including the answers that are "they do not say".

How much does the PANELCONSA S.A. Emmedue M2 - PSME (single structural), PSTE (partition), PDME (double), PSSGE (slab with beams); panel PSME80 cost?

PANELCONSA S.A. publishes no price for this model. Across the whole Index only about a third of makers publish a price in dollars at all.

What wind speed is the PANELCONSA S.A. Emmedue M2 - PSME (single structural), PSTE (partition), PDME (double), PSSGE (slab with beams); panel PSME80 engineered to?

PANELCONSA S.A. does not publish a design wind speed for this model. Only about one kit maker in ten publishes one. Note that "hurricane rated" has no legal definition in the United States, so a page using that phrase without a number has told you nothing.

What snow load can the PANELCONSA S.A. Emmedue M2 - PSME (single structural), PSTE (partition), PDME (double), PSSGE (slab with beams); panel PSME80 roof take?

PANELCONSA S.A. does not publish a snow load for this model. Around one maker in twenty does.

Can you actually buy the PANELCONSA S.A. Emmedue M2 - PSME (single structural), PSTE (partition), PDME (double), PSSGE (slab with beams); panel PSME80?

We could not establish whether PANELCONSA S.A. will take an order for this model today. A published render and a waitlist are not the same thing as a product you can buy.

What foundation does the PANELCONSA S.A. Emmedue M2 - PSME (single structural), PSTE (partition), PDME (double), PSSGE (slab with beams); panel PSME80 need?

PANELCONSA S.A. does not publish foundation options for this model. That matters more than it sounds: in a FEMA A or V flood zone the finished floor has to sit above the base flood elevation, and a kit offered on a slab only cannot get there.

How well does the PANELCONSA S.A. Emmedue M2 - PSME (single structural), PSTE (partition), PDME (double), PSSGE (slab with beams); panel PSME80 stand up to a hurricane or a wildfire?

The honest answer is what it resists, and under what conditions. No kit home is proof against either, and any page telling you otherwise is selling. "Hurricane rated" has no legal definition in the United States, no house can be tornado rated, and whole building certifications like LEED, Passive House and HERS all require a built, sited, inspected home and cannot be attached to a model from a spec sheet. What a maker can honestly tell you is what the design resists and under what conditions. For this model, they publish nothing at all.

Will the PANELCONSA S.A. Emmedue M2 - PSME (single structural), PSTE (partition), PDME (double), PSSGE (slab with beams); panel PSME80 work on my land?

Nothing on any spec sheet can answer that, including this one. Wind, snow, seismic, flood and soil requirements come from your address, not from the kit. The Kit Home Finder runs every kit in the Index against the published hazard data for your point and shows you what survives and why the rest did not. It is free.

Compare

Nothing here is ranked by what anyone pays us, because no kit maker has ever paid for placement on this site.

How it compares

It documents more than the average concrete panel kit, 25 percent against 15, and more than 91 of the other 122 we hold. It publishes no wind rating, where 10 percent of concrete panel makers do.

Computed across all 514 kit homes in the Index, 123 of them concrete panel. Recomputed on every build.

Sources

Where these values came from	https://www.panelconsa.com/preguntas-frecuentes/
Maker's site	https://www.panelconsa.com/
Last checked	13 August 2026

Values are what the maker published on the date above. Makers change pages without notice. If you find something out of date, write to hello@kithomefinder.com and we will recheck it and re-cite it. Members can dispute any figure on the page, and the dispute and its resolution are both published.

Membership

PANELCONSA S.A. will not tell you what this costs. Members get the delivered cost by stage.

The narrowing is free and always will be. Membership is for the part after you have your shortlist, when you need to act on it.

Delivered cost by build stage, so you can see what the published number leaves out
See it on your land. Your parcel with the footprint dropped on it to scale, setbacks checked
The questions to send makers who publish nothing, written from their own blanks

Everything membership includes

$47 once, for life

No subscription. No kit maker has ever paid for placement here, at any price, and none ever will.

Become a member