Kit Home Index › Quonset
Curvco Steel Buildings
QuonsetCan be orderedCurvco Steel Buildings ↗
Curvco Steel Buildings is published at $8 per square foot.
Curvco Steel Buildings does not publish a wind rating, a snow load or anything about fire for this model, so 81 percent of the fields we score are blank.
None of that tells you whether it works on your land. Wind, snow, seismic and flood performance are site specific engineering, so the only useful answer comes from running this kit against your address.
Completeness
19 percent of the fields we score are backed by something Curvco Steel Buildings published. Why completeness is never part of the grade.
The thing nobody else will tell you
This kit cannot be scored on its own. Nothing on this page tells you whether it works on your land.
Wind, snow, seismic and flood performance come from your address, not from this kit. Put in an address and the gates run against the real requirement at that point.
Score this kit against my land
Free, and it stays free.
The Kit Home Finder Grade
| Buyability weight 25 | Not rated Not enough published to rate ordering. We need to know whether you can place an order, plus at least two of the price, the lead time and where they deliver. |
|---|---|
| Cost honesty weight 25 | 60 publishes a price, publishes a rate range, itemises 3 of 14 build stages |
| Materials and carbon tier weight 15 | 40 new steel framing, a higher embodied carbon class |
Rubric v1.0, August 2026. Site fit is not in this grade, because it depends on your land rather than on the kit. Every weight, and what we refuse to grade.
What the maker publishes
Everything here came off Curvco Steel Buildings's own pages, cited at the bottom. A blank is a blank: we never fill one in.
| Build type | Quonset |
|---|---|
| Structural system | Arch-panel corrugated steel, predrilled bolt-together |
| Finished size | Not published |
| Bedrooms | Not published |
| Bathrooms | Not published |
| Wall R value | Not published |
| Roof R value | Not published |
| Foundation types | Not published |
| Lead time | Not published |
| Delivers to | Not published |
| Country | United States |
| Build difficulty | Hand tools and helpers Assembled from parts by hand. Slow rather than technical. This maker says an owner can put it up themselves. Read from the maker and the method. |
What the maker says it resists
Design capability as published. Not a certification, not a rating of your house, and not proof against anything.
| Engineered wind speed | Not published |
|---|---|
| Roof snow capability | Not published |
| Seismic | Not published |
| Fire | Not published |
Price
$8 to $14 per square foot
The maker publishes a rate per square foot and no square footage for this model, so there is no honest total to show. Ask them for the finished size.
| What that number covers | USD per sq ft. Includes complete erection and foundation drawings/manuals, and a US steel mill warranty against rust and perforation. |
|---|
What else we found
No numeric wind/snow ratings published on this pricing page, despite general marketing elsewhere about hurricane/snow resistance (see Curvco's steel-frame homes entry).
Questions to send this maker
Generated from what they left blank. Every one of these is a thing they could answer today and have chosen not to publish. Copy them into an email. If they answer, tell us and we will update this page with the citation.
- What design wind speed is this model engineered to, in miles per hour, and at what Risk Category and Exposure Category?
- What ground snow load can the roof carry, in pounds per square foot, and is that the ground load or the roof load?
- What is the roof assembly's fire classification, and are the vents ember resistant?
- What Seismic Design Category will you engineer this model to, and is that included or a paid upgrade?
- Which foundation types does this kit support, and can it sit on piers above a base flood elevation?
- What is the wall R value, and is that nominal insulation or a tested whole assembly value including thermal bridging?
- What is the roof R value, and is it nominal or whole assembly?
- What is the finished square footage of this model?
- What is the lead time in weeks from deposit to delivery, right now?
- Which states will you deliver to, and which will you not?
Across the whole Index, the average kit publishes about a quarter of what a buyer needs. This maker is at 19 percent.
Questions people ask about the Curvco Steel Buildings
Answered from what Curvco Steel Buildings publishes, including the answers that are "they do not say".
How much does the Curvco Steel Buildings cost?
Curvco Steel Buildings publishes a rate, not a total: $8 per square foot to $14. They publish no square footage for this model, so there is no honest total to give.
What wind speed is the Curvco Steel Buildings engineered to?
Curvco Steel Buildings does not publish a design wind speed for this model. Only about one kit maker in ten publishes one. Note that "hurricane rated" has no legal definition in the United States, so a page using that phrase without a number has told you nothing.
What snow load can the Curvco Steel Buildings roof take?
Curvco Steel Buildings does not publish a snow load for this model. Around one maker in twenty does.
Can you actually buy the Curvco Steel Buildings?
Yes. Curvco Steel Buildings takes orders for this model today.
What foundation does the Curvco Steel Buildings need?
Curvco Steel Buildings does not publish foundation options for this model. That matters more than it sounds: in a FEMA A or V flood zone the finished floor has to sit above the base flood elevation, and a kit offered on a slab only cannot get there.
How well does the Curvco Steel Buildings stand up to a hurricane or a wildfire?
The honest answer is what it resists, and under what conditions. No kit home is proof against either, and any page telling you otherwise is selling. "Hurricane rated" has no legal definition in the United States, no house can be tornado rated, and whole building certifications like LEED, Passive House and HERS all require a built, sited, inspected home and cannot be attached to a model from a spec sheet. What a maker can honestly tell you is what the design resists and under what conditions. For this model, they publish nothing at all.
Will the Curvco Steel Buildings work on my land?
Nothing on any spec sheet can answer that, including this one. Wind, snow, seismic, flood and soil requirements come from your address, not from the kit. The Kit Home Finder runs every kit in the Index against the published hazard data for your point and shows you what survives and why the rest did not. It is free.
Compare
Nothing here is ranked by what anyone pays us, because no kit maker has ever paid for placement on this site.
Other kits from Curvco Steel Buildings
Other quonset kits in the Index
Quonset
Documented31% Price BuildingsQuonset Hut (A/P, Q, X, S, R, T Models)
Documented31% Powerbilt Steel BuildingsArch Building (A/S/Q/P Model)
Documented25% QuonsetHutKit.comQ-Series
Documented25% Steel Commander CorpQ-Model
Documented25% VOD Steel BuildingsArch-Style Building System (Apex/S/Alpine-Viking/Q Series)
Documented25%How it compares
It documents exactly the average for a quonset kit, 19 percent.
Computed across all 514 kit homes in the Index, 17 of them quonset. Recomputed on every build.
Sources
| Where these values came from | https://www.curvcosteelbuildings.com/quonset-hut-prices/ |
|---|---|
| Maker's site | https://www.curvcosteelbuildings.com |
| Last checked | 13 August 2026 |
Values are what the maker published on the date above. Makers change pages without notice. If you find something out of date, write to hello@kithomefinder.com and we will recheck it and re-cite it. Members can dispute any figure on the page, and the dispute and its resolution are both published.
Membership
81 percent of this page is blank. Members get the contact and the questions to fill it in.
The narrowing is free and always will be. Membership is for the part after you have your shortlist, when you need to act on it.
- Delivered cost by build stage, so you can see what the published number leaves out
- See it on your land. Your parcel with the footprint dropped on it to scale, setbacks checked
- The questions to send makers who publish nothing, written from their own blanks
Everything membership includes
$47 once, for life
No subscription. No kit maker has ever paid for placement here, at any price, and none ever will.
Become a member